Avaya IP Office Basic Edition Manual page 170

ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #307. The phone will display Forced Account Code.
4. At the Extension: prompt, enter the number of the extension to be programmed.
5. Enter 1 (assigned) or 2 (not assigned). The default is 2 (not assigned).
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
- Issue 6a (Thursday, February 22, 2018)
Page 170