Avaya IP Office Basic Edition Manual page 128

ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #606. The phone displays Doorphone Alert Ext.
4. Enter the first alert system extension number.
5. Enter the required value:
Value Setting
1 No alert. This is the default setting.
2 Doorphone 1 alert extension.
3 Doorphone 2 alert extension.
4 Doorphone 1 and 2 alert extension.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
- Issue 6a (Thursday, February 22, 2018)
Page 128