Avaya IP Office Basic Edition Manual page 90

4. Enter the required value. The default is 2 (not active), ie. use supervised disconnection.
·
1 = Active/Assigned.
·
2 = Not Active/Not Assigned (the default setting).
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
5. The change requires the system to be rebooted. At the Immed Reboot? prompt, press
Remove to cancel.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
Enter 22 to reboot or
- Issue 6a (Thursday, February 22, 2018)
Page 90