System Password; Must Enter The Password To Make Any Outgoing Calls Except Calls To; And Marked System Speed Dials - Avaya IP Office Basic Edition Manual

Hide thumbs Also See for IP Office Basic Edition:
Table of Contents

Advertisement

6.8 System Password

The system password is a four-digit password that users can enter from their telephones to override dialing restrictions if
the extension has access to an outside line. Through system administration you can set and change the system
password.
·
The password overrides dialing restrictions.
·
Once a password is programmed, you must enter it to turn
service is on, users in the
calls to numbers on the
·
Dialing restrictions for extensions not in the Night Service Group remain the same as during normal daytime
operation.
·
For M-Series and T-Series phones, the system password, if set, is also used to control access to many phone based
administration menus.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the
up or down
Select.
3. Use the
up or down
press Select.
·
Alternatively, dial # and the
4. Use the
up or down
Select.
5. Enter the new four digit system password. Use Default to return to the default setting of no password.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #403. The phone displays Set System Password.
4. Enter a four-digit password.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #403. The phone displays Set System Password.
4. Enter a four-digit password.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Night Service Group
187
Emergency Phone Number List
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Restrictions/Permissions. When highlighted,
system administration
arrow buttons to scroll the display to Set System Password. When highlighted, press
PHONE. Alternatively use the Back button to move to another menu.

system password

set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Night Service
189
must enter the password to make any outgoing calls except
and
marked system speed dial
108
PHONE button to display the Admin soft key
SPEAKER,
10
code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
on and off. Additionally, if night
numbers.
139
MUTE and
HEADSET
Page 114

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP Office Basic Edition and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents