Programming A Feature Code Onto A Memory Button; Programming Feature Buttons; Erasing A Feature Button - Nortel Compact ICS 7.1 Coordinator Manual

Programming a feature code onto a
memory button
You can program a feature code onto a memory button. In some cases,
pressing the button a second time cancels the feature.

Programming feature buttons

Any memory button not programmed as an external or internal line, target
line, Answer button, or handsfree/mute button, is available for features.
Press ≤•‹.
1.
2. Press the memory button you want to program with a feature.
3. Enter the appropriate feature code you want to assign onto the button.
The following feature codes cannot be programmed onto a memory button:
Long Tones and any code beginning with • except ≤•fi‚⁄
(Language Choice), ≤•‡ (Contrast Adjustment), and the SWCA
buttons ≤•fi¤⁄ to ≤•fi‹fi.
Tip -
feature code, you must enter a line pool access code
after the feature code. The programmed line pool button
accesses a specific line pool, not the line pool feature.

Erasing a feature button

Press ≤•⁄.
1.
2. Press the feature button.
Press ≤ or OK to erase the button.
3.
N0130955 01
When you program a button with the line pool
Customizing your telephone / 147
Compact ICS 7.1 System Coordinator Guide
≤•‹