Inspect The Ntak79 Circuit Card; Set The Switches On The Ntak79 - Nortel Meridian 1 Option 11C Manual

Page 42 of 126 2.0 Mb PRI Implementation

Inspect the NTAK79 circuit card

Set the switches on the NTAK79

553-3011-315 Standard 13.00
• Locate the NTAK79 2.0 Mb circuit card and carefully remove it from its
packaging.
• Inspect the circuit card for any visible damage which may have occurred
during shipping.
The NTAK79 incorporates four on-board dip switches. The tables that follow
provide information on the various settings and related functions of these
switches.
Note: The ON position for all the switches is towards the bottom of the
card. This is indicated by a white dot printed on the board adjacent to the
bottom left corner of each individual switch.
January 2002