Table of Contents
Advertisement
3. Basic Operation
3.1.3 Control Panel
1. LIMIT LED
2. ERROR LED
3. OUTPUT LED
4. OUTPUT key
5. RANGE key
6. MENU key
7. Soft-key
Number
1
LIMIT LED
2
ERROR LED
3
OUTPUT LED
4
OUTPUT key
5
RANGE key
6
MENU key
7
Soft-key
8
LCD screen
9
MEMORY key
10
V key
11
F key
44
Figure 3-3 Component Name (Control Panel)
Table 3-3 Component Name (Control Panel)
Name
Illuminates when the peak current limiter,
RMS current limiter, or wattage limiter
activates.
[DP series Type R only]
Flashes when the reverse power flow
satisfies one of the following conditions.
The reverse power exceeding 40% of the
electric power capacity has lasted for 3
minutes.
The reverse power exceeding 40% of the
electric power capacity has occupied 20%
in duty cycle.
Illuminates when an error is detected.
Illuminates in the output on state.
Turns the output on or off.
Switches between the 100 V and 200 V
ranges.
Displays the root menu.
Assigned with the functions displayed at the
bottom of the LCD screen.
Displays the measured values or menu.
Displays the Memory View.
Opens the numerical entry box for the
output voltage setting.
Opens the numerical entry box for the
frequency setting.
8. LCD screen
Description
PROGRAMMABLE AC POWER SOURCE
9. MEMORY key
10. V key
11. F key
12. I key
13. SHIFT key
14. SHIFT LED
15. Numeric keypad
16. Arrow key
17. Jog
18. Shuttle
19. ENTER key
20. CANCEL key
Refer to
4.1
8.1
3.4.8
3.4.8
3.4.2
3.3.1
5.1
5.1
4.8
3.4.4,
3.4.5
3.4.6
Advertisement
Table of Contents
