Control Using External Control Function - NF DP Series Instruction Manual

4. Advanced Operation
2. Press the [Osc] soft-key and select [2:Source]. From the opened menu, select [2: VCA].
3. Set the [Gain] item.
4. Supply a DC voltage to the external signal input connector.
5. Turn on the output.
4.18

Control Using External Control Function

The following functions can be selected.
Item
Disable Disable the control input of the CONTROL I/O. The status output signal is output
(See 4.18.1).
Enable Enable the CONTROL I/O (See 4.18.1).
DevCtrl You can control DIP (See 4.18.2).
192
Description
PROGRAMMABLE AC POWER SOURCE