Executing Simulation - NF DP Series Instruction Manual

4. Advanced Operation
4. Push the [Recall] soft-key.
5. The confirmation window for loading the simulation opens. Select [OK]. The specified
simulation data is loaded.
-------- Notes ------------------------------------------------------------------------------------------------------------
 The number of simulation data files saved in a USB memory should be 500 or less. If the
number of files exceeds this limit, this product cannot recognize the simulation data files in the
USB memory.
-----------------------------------------------------------------------------------------------------------------------------

4.3.7 Executing Simulation

The edited simulation can be executed after converted to executable program by compile operation.
 Transition to Simulation Edit View
When pushing [Compile] soft-key in the Simulation Edit View, the edited power fluctuation is
compiled, and then the screen transitions to Simulation Control View. If output is turned on in the
Simulation Edit View, the output transitions to the state set in the initial step, at the same time as
compiling.
130 PROGRAMMABLE AC POWER SOURCE