Lan - NF DP Series Instruction Manual

6.1.4 LAN

For the interface specifications, see 10.27.
For how to set LAN interface, refer to the Instruction Manual (Remote Control).
 Operation procedure
1. Connect this product and computer with LAN cable. LAN connector is available on the rear of this
product. Turn off this product and the computer before connecting or disconnecting the cable.
2. Press the MENU key to move to the root menu, and then select [System]. The system setting
window opens.
3. Put the cursor on [Setup] next to the [Remote] item, then press the ENTER key. The remote setting
window opens.
DP Series/DP Series Type R
6.1 Communication Interface
235