Figure 3-12 The Numerical Entry Box - NF DP Series Instruction Manual

3. Basic Operation
it is incremented or decremented. The value for the voltage or frequency output is applied even
during the edit. If you press the ENTER key or the CANCEL key, the numerical entry box is closed.
 Enter values directly by using the numeric keypad
For an item required to set values, hover the cursor over a value (which will be highlighted) and
enter a new value by using the numeric keypad. A numerical entry box opens as you start entering a
value, and the entered value is displayed. Press the ENTER key to confirm the value. The previous
values for the voltage or frequency output are held until you press the ENTER key. If you press the
CANCEL key, the settings are not changed.
-------- Notes ------------------------------------------------------------------------------------------------------------
 If you already know the value to set, the direct entry using the numeric keypad will be
convenient.
 If you want to increment/decrement the value by one step at one time, use the up and down
arrow key.
 If you want to increment/decrement the value by a large amount step by step, use the jog.
 If you want to increment/decrement the value by a large amount quickly, use the shuttle.
-----------------------------------------------------------------------------------------------------------------------------
52

Figure 3-12 The Numerical Entry Box

PROGRAMMABLE AC POWER SOURCE