Enlarge Display Letters For The Measured Value; Figure 3-14 The Normal View (Left) And The Simple View Mode (Right) - NF DP Series Instruction Manual

 Operation procedures by using shortcuts
1. +
Press the SHIFT key to enter the shift state (the SHIFT LED illuminates). When you press the 3
key of the numeric keypad during the shift state, the measuring mode is switched in the
following order: RMS, AVG, Peak, RMS. Some measuring modes may be skipped and cannot
be selected depending on the AC/DC mode.

3.4.11 Enlarge Display Letters for the Measured Value

You can switch the measured value display mode between normal (normal) and the mode in which the
letters are enlarged (simple) shown in Figure 3–14. In the Simple View mode, three types of measured
values are displayed. You can select the measured value being displayed in the Simple View mode.

Figure 3-14 The Normal View (left) and the Simple View Mode (right)

DP Series/DP Series Type R
Switching the display format of the measured values
3.4 Using the Continuous Function
69