Power Cable; Table 7-3 Power Cable Model Names - NF DP Series Instruction Manual

7.5

Power Cable

Cables for the power input. They vary in cross sectional area depending on the power input and the
rated output as shown in Table 7-3. A crimp-type terminal is attached to each cable on the end which
is to be connected to the input terminal of this product. The length of the cable is 3 m.
 On the power cable, the end which is to be connected to the distribution board has no terminal
attached. Use a crimp-type terminal appropriate for the terminal screw diameter of the
distribution board to connect the cable firmly.
 The power cable is dedicated only to this product. Do not use it with any other product.
Model name Power input
PA-001-3251 Single-phase
input
PA-001-3252
(1P2W)
PA-001-3253
PA-001-3254
PA-001-3255 Three-phase
three-wire
PA-001-3256
input
(3P3W)
PA-001-3257
PA-001-3263 Three-phase
four-wire
input
PA-001-3264
(3P4W)
DP Series/DP Series Type R

Table 7-3 Power Cable Model Names

Rated output
1.5 kVA
3.0 kVA
4.5 kVA
6.0 kVA
7.5 kVA
9.0 kVA
10.5 kVA
12.0 kVA
4.5 kVA
6.0 kVA
7.5 kVA
9.0 kVA
10.5 kVA
12.0 kVA
4.5 kVA
6.0 kVA
7.5 kVA
9.0 kVA
10.5 kVA
12.0 kVA
Maximum
Terminal
power
size
consumption
2.25 kVA M6
4.50 kVA
6.75 kVA
9.00 kVA
11.25 kVA M8
13.50 kVA
15.75 kVA
18.00 kVA
6.75 kVA M6
9.00 kVA
11.25 kVA
13.50 kVA
15.75 kVA
18.00 kVA
6.75 kVA
9.00 kVA
11.25 kVA
13.50 kVA
15.75 kVA
18.00 kVA
7.5 Power Cable
Nominal cross
sectional area
2
5.5 mm approx
2
14 mm approx
2
22 mm approx
2
38 mm approx
2
5.5 mm approx
2
14 mm approx
2
22 mm approx
2
5.5 mm approx
2
14 mm approx
243