Table 3-1 Component Name (Front) - NF DP Series Instruction Manual

Number
1 Control panel
2 Remote controller
connector
3 USB memory connector
4 Front grill
5 Front grill holder
6 Outlet
(Only for the single-phase
model)
7 Power switch
8 Caster
9 Adjuster Foot
10 Phase configuration setting
switch
(Multi-phase model only)
DP Series/DP Series Type R

Table 3-1 Component Name (Front)

Name
Configures the settings and turns the
output on or off. Information such as
setting values and measured values is
displayed on the LCD screen.
Optional remote controller can be
connected.
USB memory can be connected.
The fresh air inlet. An air filter is
attached.
Clasps for fixing the front grill.
Can provide up to 15 A of AC output per
outlet.
Turns the power on/off.
Caster with the freely movable
front-wheels and fixed rear-wheels. Can
be used to move this product in the
horizontal location.
Can be used to fix this product
temporarily in the horizontal location.
Set the output phase configuration.
3.1 Component Name
Description Refer to
3.1.3
7.1
4.9
9.2
9.2
2.5
3.2
2.3
2.2
3.2.2
41