8.5.3
Default Values
When the analyzer is delivered, or if data are initialized, alarm and other setting defaults are as
shown in Table 8.13.
Table 8.13
(HH) high-high alarm
(H) high alarm
(L) low alarm
(LL) low-low alarm
Calibration correction alarm
Alarm
settings
Calibration stability alarm
Upper and lower temp. alarm
Upper and lower press. alarm
Simple cell resistance alarm
Fault
Warmup
Switching output range
Calibration
Maintenance
Other
settings
Blow back
Cal. gas pressure drop
Process upset
Cal. blowback simple cell resist.
Contact state during operation
Note: Blank boxes in the above table indicate that the default is "disabled."
Output Contact Default Settings
Item to be selected
<8. Detailed Data Setting>
Contact
Contact
output 1
output 2
ON
ON
ON
Open
Closed
IM 11M12G01-02EN
8-15
Contact
Contact
output 3
output 4
�
ON
�
ON
�
�
�
�
�
�
�
ON
�
�
�
�
�
�
�
Closed
Closed
(fixed)
1sh Edition : Mar. 25, 2021-00