Measurement Info; Product Information; Log Information - YOKOGAWA ZR22G User Manual

10.2.4

Measurement info

Displays average, maximum, minimum value of measurement. Maximum and minimum value
show the date when the measurement is conducted. Setup the monitoring hour value of average/
max. min according to the setting described in 8.6.2.
Figure 10.8
10.2.5

Product information

Displays the set time (see "8.7.1
software, HART address, HART device revision number.
Figure 10.9
10.2.6

Log information

Displays Alarm occurrence, Alarm cancel, Calibration history, Cell resistance during calibration,
date of power-on.Up to 20 logs are displayed. When you tap some specific log, you can see the
detail data.
table 10.2
Log item
Alarm: cell voltage error
Alarm: Heater temperature error
Alarm occurrence: (Other)
ALARM RESET
Zero/span calibration history
Cell internal storage resistor at zero
calibration
Power Supply ON
Farm update
Operator ID
measurement info
Product information
Log information
Cell electromotive force (mV)
Thermocouple electromotive force (mV)
-
-
Span Correction Ratio (%), Zero
Compensation Ratio (%)
Cell resistance (Ω)
-
-
Operator ID input value
<10. Other Functions>
Setting the Date-and-Time"), version number of Main
Details (except Time)
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
10-6