11.2.2
Cleaning
Use a soft dry cloth to clean any part of the converter during inspection and maintenance.
11.2.3
Adjust LCD panel
Adjust he position of touch button or brightness of LCD panel.
"Sensor menu" > "Other menu" > "Adjust panel"
Figure 11.8
Touch panel
n
How to adjust the touch panel
l
(1) Touch "+" and you will see "Please touch the point".
(2) Touch "+" and hold until you see "Please release from the point".
(3) Once you release the point, "+" moves to 2nd place.
Touch and hold "+" until you see "Please release from the point." Release the point.
Repeat touching on/off as (1),(2), until "+" moves to 4th place.
(4) After completing the touch and hold the 4th place, you will see "Please check the calibration
result."
If you touch the screen, the point you touched shows "Displayed point" by coordinate points.
(5) Touch "+" again, which shows "Touched point" by coordinate points. Check if the difference
in coordinates of both points are acceptable.
To leave the screen, touch and hold it for three seconds.
(6) You will return to the first page of Adjust panel.
Adjust panel
<11. Inspection and Maintenance>
IM 11M12G01-02EN
11-10
1sh Edition : Mar. 25, 2021-00