YOKOGAWA ZR22G User Manual page 152

Figure 8.20 Passwords Display
<Default setting>
The passwords are not set as shipped from factory. If you reset data, the password settings are
deleted.
CAUTION
If you setup a password, write down the password so you won't forget it.
You are asked for the password when entering a protected operation, such as "Setting" or
calibration.
If your password is not verified, the message "Wrong password" (or similar message) appears.
When you enter a correct password, you can move to operator ID entry screen.
The operator ID is recorded in the log information to identify the person who operated on it. You
can proceed without entering anything. Operator IDs can be up to 4 characters
Figure 8.21 Password, Operator ID verification
<8. Detailed Data Setting>
IM 11M12G01-02EN
8-29
1sh Edition : Mar. 25, 2021-00