2.5.2
ZR40H Automatic Calibration Unit
This automatic calibration unit is applied to supply specified flow of reference gas and calibration
gas during automatic calibration to the detector in a system configuration (System 3). It can also
be used for safety purge when unburned gas is detected.
Specifications
l
Used when auto calibration is required for the separate type and instrument air is provided.
The solenoid valves are provided as standard.
Construction:
Mounting:
Materials:
Finish:
Piping Connection:
Power Supply:
Reference Gas Pressure: Sample gas pressure plus approx. 150 kPa (690 kPa max.), (Pressure
Air Consumption:
Weight:
Ambient Temperature: -20 to +5°C, no condensation or freezing
Ambient Humidity:
Storage Temperature: -30 to 65°C
Model and Codes
l
Model
Suffix code
ZR40H
- - - - - - - - - - - - -
Gas piping
-R
connection
-T
Wiring
connection
—
Dust-proof and rainproof construction:
NEMA4X/IP67-only for case coating solenoid valve, not flowmeter
(excluding flowmeter)
2-inch pipe or wall mounting, no vibration
Body; Aluminum alloy, Piping; SUS316 (JIS), SUS304 (JIS), Flowmeter;
MA (Metha acrylate resin). Bracket; SUS304 (JIS)
Polyurethane corrosion-resistance coating, mint green (Munsell
5.6BG3.3/2.9)
Refer to Model and Codes
24 V DC (from ZR402G), Power consumption; Approx.1.3W
at inlet of the Automatic Calibration Unit)
Approx. 1.5 l/min
Approx. 3.5 kg
0 to 95%RH
Option code
- - - - - - - -
Automatic calibration unit for ZR402G
- - - - - - - -
Rc 1/4
- - - - - - - -
1/4 NPT
-P
- - - - - - - -
Pipe connection (G1/2)
-G
- - - - - - - -
Pg 13.5
-M
- - - - - - - -
M20 x 1.5 mm
-T
- - - - - - - -
1/2 NPT
-A
- - - - - - - -
Always -A
<2. Specifications>
Description
IM 11M12G01-02EN
2-26
1sh Edition : Mar. 25, 2021-00