Basic Troubleshooting Steps - ProSoft Technology inRax MVI69-PDPMV1 User Manual

MVI69-PDPMV1 ♦ CompactLogix or MicroLogix Platform
PROFIBUS DPV1 Master
5.2

Basic Troubleshooting Steps

1 Verify that the module is installed correctly, and is communicating with the
processor. Refer to Module Setup (page 45) for setup procedures.
2 Install the most current version of ProSoft Configuration Builder.
3 Note the color and behavior of the LED Status Indicators (lights) on the front
panel. Refer to the chart in the following section for examples.
Special Note - Transferring Configuration Data to Replacement Module
All module configuration data (including MVI69 and PROFIBUS Network) are
stored on the Compact Flash in the MVI69 module. If a module failure occurs,
transfer the configuration data to the new module by moving the Compact Flash
from the old module to the replacement module.
ProSoft Technology, Inc.
July 8, 2011
Diagnostics and Troubleshooting
User Manual
Page 143 of 225