Call Controller + 2-Fader Phone Module - Axia element v.2.0 Installation & User Manual

Call Controller + 2-Fader Phone Module

The faders on this module can be used as faders for
any console source however they are most commonly as-
sociated with phone hybrids.
This module (Figure 5-3) has a high level of integra-
tion with Telos multi-line talk show systems. It features
the hybrid controls found on Telos talk show controllers,
flanked by two faders. Typically, the left fader is linked
to the left hybrid control, and the right fader to the right
hybrid control. The faders and controls are identical to
those described for the 4-Phone Module in the previous
section.
For details on hybrid control operation and descrip-
tion of Status Symbols used, please refer to the Opera-
tor's Manual supplied with your Telos phone system.
Tip: If the caller cannot hear the operator, the
most common cause is having the phone chan-
nel turned ON. Remember - when the phone
channel is ON, the backfeed to caller is a mix-
minus of PGM-1 (default). Only when the phone
channel is OFF will the caller hear what is as-
signed to PGM-4 (Phone)
Appendix D: Working With Phone Hybrids pro-
vides details on the configuration of various Telos phone
systems when used with your Element console.
Note: The Element's 2-Fader Monitor Module
also includes two Phone faders complete with
Set and Hold buttons.
Figure 5-3:Call Controller + 2-Fader Phone Module
©2016 Axia Audio- Rev 1.8.1