Reset The P1 Key To Customer's Functionality - GE LOGIQ e R4 Series Basic Service Manual

GE
Direction 5370626-100, Revision 18
7-4-3 Capturing a Screen
For LOGIQ e R4.x.x, LOGIQ i R4.x.x, Vivid e R4.x.x
6.) A Save dialog box will be opened.
• For LOGIQ e R4.x.x, LOGIQ i R4.x.x, Vivid e R4.x.x, choose d:\export folder as the archive location
to save the image on the DVD-R.
• For LOGIQ e R5.x.x, LOGIQ e R6.x.x, LOGIQ e R7.x.x, LOGIQ i R5.x.x, Vivid e R5.x.x, Vivid e
R6.x.x, LOGIQ e Vet R6.x.x, LOGIQ e Vet R7.x.x, select Save first, and Select Transfer to CD/DVD
to save the image on the CD/DVD.
7-4-4

Reset the P1 Key to Customer's Functionality

If the customer had programmed the P3 Key to a function other than screen capture, restore that
functionality recorded in
1.) Click Utility/Config on the keyboard.
2.) Select Connectivity from the Utilities Menu.
3.) Select the Buttons tab on the Connectivity screen.
4.) In the Physical Print Button field, select Print1.
5.) In the Destinations list, select the service(s) recorded in
6.) In the Physical Print Buttons section, select the parameters related to the service recorded in
7-8
(cont'd)
Figure 7-5 Save Dialog Box
section 7-4-1 on page
step 6, Section 7-4-1.
Section 7-4 - Screen Captures
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
For LOGIQ e R5.x.x, R6.x.x, R7.x.x, LOGIQ i R5.x.x, Vivid e R5.x.x,
R6.x.x, LOGIQ e Vet R6.x.x, R7.x.x
6. Refer to Figure 7-2.
step 5, Section 7-4-1.