GE LOGIQ e R4 Series Basic Service Manual page 188

GE
Direction 5370626-100, Revision 18
8-3-1 Loading Base Image Software with DVD
6.) Select one of the options for loading the system. Select choice [a] to load the complete disk.
If you select [a], ALL existing software and data will be erased. If backup has not been
NOTICE
performed, all data like Patient Database, System Configuration and User Configurations
(Customer Presets) will be lost.
-
NOTE: NOTE: When to select [a] to load complete disk, please ensure that any patient data on the disk
has been backed up.
-
-
While the software install procedure is designed to preserve data, you should select
WARNING WARNING
choice [b] to format disk C only.
7.) Press "Yes" or "No" to continue.
8-6
Refer to Figure 8-4 on page 8-6
To select [a], the complete disk will be loaded. This option is recommended for
applicationsoftware upgrade.
To select [b], only the bootable C: partition is loaded. This option is intended for recovery of a
system that will not boot up. It is not recommended for application software upgrade because
during upgrade process, the data on the system would possibly be impacted.
To select [c] to quit system upgrade process
Figure 8-4 Selection for loading the system
Figure 8-5 Confirmation on loading the system
Section 8-3 - Loading the System Software
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
(cont'd)