GE LOGIQ e R4 Series Basic Service Manual page 78

GE
Direction 5370626-100, Revision 16
3-6-5-4 Connect peripherals (cont'd)
I.) Connect the USB HDD to the system. The USB Harddisk can be properly connected using USB
port 1 and 2.
J.) Connect the BarCode Reader to the system, the BarCode Reader can be properly connected via
USB port 1 or 2.
3-24
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Figure 3-21 Emergency Disk Connection
Figure 3-22 BarCode Reader Connection
Section 3-6 - System Configuration