Table of Contents
Advertisement
GE
Direction 5370626-100, Revision 18
10-3-1
How often should care & maintenance tasks be performed?
The Care & Maintenance Task Schedule (provided on page
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e should be serviced and outlines items requiring special
attention.
NOTE:
It is the customer's responsibility to ensure the LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e care &
maintenance is performed as scheduled in order to retain its high level of safety, dependability
and performance.
Your GE Service Representative has an in-depth knowlegde of your LOGIQ e/LOGIQ e Vet/LOGIQ i/
Vivid e ultrasound scanning system and can best provide competent, efficient service. Please contact
us for coverage information and/or price for service.
The service procedures and recommended intervals shown in the Care & Maintenance Task Schedule
assumes that you use your LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e for an average patient load (10-12
per day) and use it as a primary mobile unit which is transported between diagnostic facilities.
NOTE:
If conditions exist which exceed typical usage and patient load, then it is recommended to
increase the maintenance frequencies.
Table 10-2
Service at Indicated Time
Clean Probes
Inspect AC Mains Cable
Inspect Cables and Connectors
Clean Console
Clean LCD
Console Leakage Current Checks
Peripheral Leakage Current Checks
Surface Probe Leakage Current Checks
Endocavity Probe Leakage
Current Checks
Measurement Accuracy Checks
NOTE:
May require specialized equipment to complete
NOTE:
PMs are not mandatory, the table above is for reference only.
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Customer Care Schedule
Daily
Weekly
•*
Chapter 10 Care & Maintenance
Table
10-2) specifies how often your
Per Facilities QA
Monthly
Program
•
•
•
•
See Note
See Note
See Note
See Note
See Note
Notes
* or before each use
Mobile Unit Check Weekly
Twice Annually
Twice Annually
Twice Annually
Quarterly
Annually
Twice Annually
10-3
Advertisement
Table of Contents
