GE LOGIQ e R4 Series Basic Service Manual page 89

GE
Direction 5370626-100, Revision 18
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose for Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ e/LOGIQ e Vet/
LOGIQ i/Vivid e console, diagnostics by using the built-in service software, and power supply
adjustments.
Table 4-1
Section
Section 4-2
Required Equipment
To perform these tests, you'll need any of the sector, linear, or convex transducers.
(normally you should check all the transducers used on the system)
Contents in chapter 4
4-1
Overview
4-2
Required Equipment
4-3
General Procedure
4-4
Software Configuration Checks
4-5
Peripheral Checks
Chapter 4 Functional Checks
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Description Page Number
4-1
4-1
4-2
4-37
4-37
4-1