GE LOGIQ e R4 Series Basic Service Manual page 268

GE
Direction 5370626-100, Revision 18
______________________________________________________________________________
______________________________________________________________________________
ELECTRICAL SAFETY
Electrical Test Performed
Outlet (correct ground &wiring config.)
Type BF Applied Part Leakage Current
Limits- Probe
enclosure Source Leakage Current -
Chassis Leakage Current Limits
Peripheral 1 Leakage Current
Peripheral 2 Leakage Current
Probe Number
(from previous page)
Probe 1:
Probe 2:
Probe 3:
Final Check. All system covers are in place. System scans with all probes as expected.
Accepted by: ______________________________________________________________________
10-20
Max Value
Allowed
Max Value
Allowed
Section 10-7 - When There's Too Much Leakage Current...
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Value
Measured OK?
PROBES
Max Value
Measured OK?
Comments
Comments