GE LOGIQ e R4 Series Basic Service Manual page 190

GE
Direction 5370626-100, Revision 18
8-3-1 Loading Base Image Software with DVD
9.) After finish updating system, remove the DVD-RW and press any key to shut down the system.
10.)Press any key to reboot system. When system first time boot up after upgrading complete, you
11.)Make a region selection when below message display as show in
NOTE: Step 11.) is only for LOGIQ e R4.x.x, LOGIQ i R4.x.x and Vivid e R4.x.x.
8-8
Refer to Figure 8-8 on page 8-8
Figure 8-8 System upgrade complete
will see the following message.
Figure 8-9 Windows start
Figure 8-10 Region selection message
Section 8-3 - Loading the System Software
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
(cont'd)
.
Figure 8-10 on page 8-8 .