Diagnostics/Troubleshooting
Reset the P1 Key to Customer's Functionality
7-10
If the customer had programmed the P1 Key to a function other
than screen capture, restore that functionality recorded in
section 'Check and Record the P2 Key Function' on page 7-6.
Refer to Figure 7-2 on page 7-6.
1. Seclect Config (F2) on the control panel.
2. Select Connectivity -> Additional Outputs.
3. In the Button field, select Print1.
4. In the Destinations list, select the service(s) recorded in step
5, Section 'Check and Record the P2 Key Function' on
page 7-6.
5. In the Physical Print Buttons section, select the parameters
related to the service recorded in step 6, section 'Check and
Record the P2 Key Function' on page 7-6.
Vivid T8/ Vivid T8 Pro – Basic Service Manual
5490863-100 English Rev. 03