GE
Direction 5370626-100, Revision 18
8-3-3
Reload the Correct Preset Region
NOTE:
After the system software loading completion, please reload the correct preset region.
1.) Reboot the system.
2.) Please select Utility-System-About and then select Additional About Information
NOTE:
After you have selected Utility-System-About and selected Additional About Information,
even the preset region is displayed, please also reload the correct preset region.
3.) Select the correct preset region. For example, select Reload Americas Preset.
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Figure 8-21 Additional About Information
Figure 8-22 Reload preset region
Chapter 8 Replacement Procedures
8-17