Color Flow Mode Checks - GE LOGIQ e R4 Series Basic Service Manual

GE
Direction 5370626-100, Revision 18
4-3-9

Color Flow Mode Checks

4-3-9-1 Preparations
1.) Connect one of the probes listed in
to the System probe connector.
2.) Turn ON the scanner (if it isn't turned on already).
Primary Menu
CF Mode
Gain
4-16
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Figure 4-11 Controls available in Color Flow Mode
Figure 4-12 CFM Mode Screen Picture Example
Section 4-3 - General Procedure
3-6-6 "Available Probes" on page 3-28, in Chapter 3 Installation
Secondary Menu