GE LOGIQ e R4 Series Basic Service Manual page 76

GE
Direction 5370626-100, Revision 16
3-6-5-4 Connect peripherals (cont'd)
D.) Connect FootSwitch to the system.
FootSwitch can be properly connected using USB Port1 or USB Port2.
1-pedal footswitch
E.) Connect Wireless LAN Adapter to the system.
Wireless LAN Adapter can be properly connected using USB port.
Wireless Lan
Adapter
F.) Connect the CRT to the system.
CRT can be properly connected using the SVGA output.
3-22
Figure 3-17 Connect Foot Switch to the system
Figure 3-18 Connect Wireless LAN Adapter to the system
Section 3-6 - System Configuration
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
3-pedal footswitch