Reset The P4 Key To Customer's Functionality - GE LOGIQ 9 Technical Manual

GE M S
EDICAL YSTEMS
D 2294854-100, R
IRECTION
7-4-3Capturing a Screen
6.) A Save dialog box will be opened. Choose d:\export folder as the archive location to save the
The InSite connection will have access to the export folder on the "D" drive to retrieve these images.
7-4-4

Reset the P4 Key to Customer's Functionality

If the customer had programmed the P4 Key to a function other than screen capture, restore that
functionality recorded in
1.) Select Utility from the Touch Panel.
2.) Select Connectivity from the Utilities Menu.
3.) Select the Buttons tab on the Connectivity screen.
4.) In the Button field, select Print4.
5.) In the Destinations section, select the service(s) recorded in
NOTE: Only output services can be associated to the print keys.
6.) In the Image generated section, select the parameters related to the service recorded in
PROPRIETARY TO GE
3
EVISION
(cont'd)
Figure 7-5 Save Dialog Box
image on the hard disk, MOD or CD-R.
Section 7-4-1 on page
destinations list displays the following information:
* Name: user defined during service configuration
* Type: the type of service
* Server: the device for which the service was configured
* Dir: direction: output, input, or both (I+O)
step 6, Section 7-4-1.
Chapter 7 Diagnostics/Troubleshooting
LOGIQ™ 9 P
7-4. Refer to Figure 7-2.
step
M
ROPRIETARY ANUAL
5, Section 7-4-1. The
7-7