GE LOGIQ e R4 Series Basic Service Manual page 178

GE
Direction 5370626-100, Revision 18
7-7-3 Insite II Configuration (For LOGIQ e R6.x.x/R7.x.x and LOGIQ e Vet R6.x.x/R7.x.x)
(cont'd)
12.)In device side, if the device is connected to network, a mail icon will show in the status bar.
13.)Press Power button. The SYSTEM-EXIT window shows up. Click Decline, the system will not
download the software, and the Insite icon in the status bar will not shown. Click Download, the
system will begin to download the software.
NOTE: If the administrator is in remote side, press Alt+F1 to display the Frontpanel simulator. Select
the On/Off button, and the system-exit window shows up.
7-30
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Figure 7-38 Status bar
Figure 7-39 System-Exit window
Figure 7-40 Frontpanel Simulator window
Section 7-7 - Network and Insite II Configuration