GE
Direction 5370626-100, Revision 18
4-3-8
M Mode Controls
4-3-8-1
Preparations
1.) Connect one of the probes listed in
to the System probe connector.
2.) Turn ON the scanner (if it isn't turned on already).
Primary Menu
Gain
M Mode
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
3-6-6 "Available Probes" on page
Figure 4-9 Controls available in M Mode
Figure 4-10 M Mode Screen Picture Example
Chapter 4 Functional Checks
3-28, in Chapter 3 Installation
Secondary Menu
M/D Cursor
4-13