Diagnostics/Troubleshooting
7-3-4 Reset the P1 Key to Customer's Functionality
7-10
If the customer had programmed the P1 Key to a function other
than screen capture, restore that functionality recorded in
section
7-3-1 'Check and Record the P2 Key Function' on
page
7-6. Refer to
Figure 7-2 on page
1. Seclect Config (F2) on the control panel.
2. Select Connectivity -> Additional Outputs.
3. In the Button field, select Print1.
4. In the Destinations list, select the service(s) recorded in step
5, Section
7-3-1 'Check and Record the P2 Key Function' on
page
7-6.
5. In the Physical Print Buttons section, select the parameters
related to the service recorded in step 6, section
7-3-1 'Check and Record the P2 Key Function' on page
Vivid T8/Vivid T8 Pro – Basic Service Manual
7-6.
5718826-100 English Rev. 10
7-6.