B Mode Checks - GE LOGIQ e R4 Series Basic Service Manual

GE
Direction 5370626-100, Revision 18
4-3-7

B Mode Checks

4-3-7-1 Preparations
1.) Connect one of the probes listed in
to the System probe connector.
2.) Turn ON the scanner (if it isn't turned on already)
NOTE: The keyboard layout varies from each Product, the following figures show LOGIQ e R5.x.x as
an example.
SoftMenu Key
Primary Menu
B Mode
4-10
LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
3-6-6 "Available Probes" on page
Figure 4-7 Controls available in B Mode
Figure 4-8 B Mode Screen Picture Example
Section 4-3 - General Procedure
3-28, in Chapter 3 Installation
Secondary Menu
Zoom/Depth
Scan Area
Freeze