Mounting / Dismounting System On Cart; Tools; Time Required; Preparations - GE Venue Fit Technical Publication

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
8-2-11

Mounting / Dismounting System on Cart

8-2-11-1

Tools

Phillips screwdriver of appropriate size (in case the captive screws are tightened hardly)
8-2-11-2

Time Required

2 min
8-2-11-3

Preparations

1.) Shut down the Venue Fit™ ultrasound unit, as described in

Dismounting System on Cart

8-2-11-4
2.) Lock the cart casters.
3.) Disconnect system cables: probes, barcode, network, HDMI and power.
4.) Tilt the system to its vertical position.
Figure 8-50 Disconnecting Cables from System
Chapter 8 - Replacement Procedures
VENUE FIT™ SERVICE MANUAL
Power Shutdown .
8-25