Sensor (Staple Finisher Diverter Plunger) Removal; Motor (Staple Finisher Transport) Removal - Lexmark M52 Series Service Manual

Sensor (staple finisher diverter plunger) removal
1
Remove the staple finisher left cover. See
2
Remove the screw (A), and then disconnect the cable (B).
3
Remove the sensor.
Motor (staple finisher transport) removal
1
Remove the staple finisher left cover. See
2
Remove the staple finisher interface cable. See
"Staple finisher left cover removal" on page
"Staple finisher left cover removal" on page
"Staple finisher interface cable removal" on page
Parts removal
599
4064
584.
584.
595.