Hcoe Transport Drive Jam Service Check - Lexmark M52 Series Service Manual

HCOE transport drive jam service check

Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Open all optional bin doors, and then check the paper path and
bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 4
Clear the optional bin paper path rollers of any dirt and
contamination.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Output bin quick feed > Feed to all bins
b
Touch Single or Continuous.
Does the problem remain?
Step 6
a
Remove the HCOE left cover. See
on page 550.
b
Reseat the cable on the motor (HCOE transport) and on the
HCOE controller board.
Does the problem remain?
Step 7
Check the motor (HCOE transport) for improper installation and
damage.
Is the motor properly installed and free of damage?
Step 8
Reinstall or replace the motor. See
removal" on page 568.
Does the problem remain?
"HCOE left cover removal"
"Motor (HCOE transport)
Diagnostics and troubleshooting
197
Yes No
Go to step 2. The problem is
solved.
Go to step 4. Go to step 3.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
Go to step 7. The problem is
solved.
Go to step 9. Go to step 8.
Go to step 9. The problem is
solved.
4064