Sfp Stapler Assembly Sensor (Finisher Bin Media Present) Removal - Lexmark T650 Service Manual

4062-XXX
4. Remove the LED sensor cover.

SFP stapler assembly sensor (finisher bin media present) removal

1. Remove the LED sensor cover. Go to
page 4-177.
2. Using a flat-blade screwdriver, release the tabs (A) on the sensor and remove it from the sensor cover.
A
3. Remove the harness connected to the media bin present sensor.
4. Remove the sensor (finisher bin media present).
4-178
Service Manual
"SFP stapler assembly LED sensor cover removal" on
Previous
Next
Go Back