Sensor (Fuser Exit) Static Jam Service Check - Lexmark M52 Series Service Manual

Sensor (fuser exit) static jam service check

Action
Step 1
Check the paper path and the trays for paper fragments and
partially fed paper.
Are the paper path and trays free of paper fragments and partially
fed paper?
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 3
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b
Find the sensor (Fuser exit).
Does the sensor status change while toggling the sensor?
Step 4
a
Remove the right cover. See
page 420.
b
Check the cable J60 on the controller board for proper
connection.
Is the cable properly connected?
Step 5
Reseat the cable, and then perform a print test.
Does the problem remain?
Step 6
Replace the fuser. See
Does the problem remain?
Step 7
Perform a print test.
Does the problem remain?
"Right cover removal" on
"Fuser removal" on page
Diagnostics and troubleshooting
Yes
Go to step 3.
Go to step 3.
Go to step 6.
Go to step 6.
Go to step 6.
Go to step 7.
452.
Contact the next
level of support.
101
4064
No
Go to step 2.
The problem is
solved.
Go to step 4.
Go to step 5.
The problem is
solved.
The problem is
solved.
The problem is
solved.