40Y Paper Jams; 405-407 Paper Jam Messages - Lexmark M52 Series Service Manual

Action
Step 22
Make sure that the tray 5 controller board is properly installed.
Reseat all the cables on the controller board.
Does the problem remain?
Step 23
Check the source tray controller board and its connector pins for
damage.
Are the tray controller board and its connectors free of damage?
Step 24
Replace the source tray controller board. See
sheet tray controller board removal" on page
Does the problem remain?

40y paper jams

405–407 paper jam messages
Error Description
code
405.13 The bin 1 diverter plunger did not reach
the sensor (OE diverter plunger) on time.
405.15 The bin 1 diverter plunger did not clear the
sensor (OE diverter plunger) on time.
405.23 The bin 2 diverter plunger did not reach
the sensor (OE diverter plunger) on time.
405.25 The bin 2 diverter plunger did not clear
the sensor (OE diverter plunger) on time.
405.33 The bin 3 diverter plunger did not reach
the sensor (OE diverter plunger) on time.
405.35 The bin 3 diverter plunger did not clear
the sensor (OE diverter plunger) on time.
405.43 The bin 4 diverter plunger did not reach
the sensor (OE diverter plunger) on time.
405.45 The bin 4 diverter plunger did not clear
the sensor (OE diverter plunger) on time.
407.13 Paper going to bin 1 did not reach the
sensor (OE pass‑through) on time.
407.15 Paper going to bin 1 did not clear the
sensor (OE pass‑through) on time.
"250‑ and 550-
506.
Action
See "Output expander diverter drive jam service check" on
page 187.
See "Sensor (OE pass‑through) late-arriving jam service
check" on page
See "Sensor (OE pass‑through) late-leaving jam service
check" on page
Diagnostics and troubleshooting
186
Yes No
Go to step 23. The problem is
solved.
Contact the next Go to step 24.
level of support.
Contact the next The problem is
level of support. solved.
189.
191.
4064