Staple, Hole Punch Finisher Latch Removal; Sensor (Shpf Paddle) Removal - Lexmark M52 Series Service Manual

Staple, hole punch finisher latch removal
1
Remove the staple, hole punch finisher left cover or right cover. See
removal" on page 699
2
Pull the latch off the finisher.
Note: The latch on the right side can be removed using the same method shown.

Sensor (SHPF paddle) removal

1
Remove the staple, hole punch finisher left cover. See
page 699.
2
Remove the staple, hole punch finisher right cover. See
on page 701.
3
Remove the staple, hole punch finisher top cover. See
page 703.
or "Staple, hole punch finisher right cover removal" on page
Parts removal
"Staple, hole punch finisher left cover
"Staple, hole punch finisher left cover removal" on
"Staple, hole punch finisher right cover removal"
"Staple, hole punch finisher top cover removal" on
737
4064
701.