After replacing the maintenance kit, the maintenance count will automatically be reset to zero to clear the 80.xy
message.
Identifying the type of fuser used in the printer
From the front of the printer:
1
Open the front door, and then remove the toner cartridge and imaging unit.
2
Find the two‑digit number to identify the fuser type.
From the rear of the printer:
1
Open the rear door.
2
Find the barcode sticker on the fuser.
The two‑digit number for identifying the fuser type can be found on the sticker.
Preventive maintenance
Between scheduled maintenance intervals, paper feed, paper transport, and image quality problems can occur.
Some preventive maintenance procedures can help prevent issues like these.
Device‑specific preventive maintenance
To clean the display and keypad, use the LCD cleaning cloth. A single two‑step LCD cleaning cloth is stored in
the compartment beneath the exit tray. Additional cleaning cloths are available.
Maintenance
762
4064