Sensor (Mailbox Pass-Through 1) Late-Arriving Or Late-Leaving Jam Service Check - Lexmark M52 Series Service Manual

Sensor (mailbox pass‑through 1) late‑arriving or late‑leaving jam service check
Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Open all optional bin doors, and then check the paper path and
bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 3
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 4
Clear the optional bin paper path rollers of any dirt and
contamination.
Does the problem remain?
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Output bin quick feed > Feed to all bins
b
Touch Single or Continuous.
Does the problem remain?
Step 6
a
Remove the mailbox left cover. See
removal" on page
b
Reseat the cable of the sensor (mailbox pass‑through 1) on the
mailbox controller board.
Does the problem remain?
Step 7
Check the sensor (mailbox pass‑through 1) for improper
installation, contamination, and damage.
Is the sensor properly installed and free of contamination and
damage?
Step 8
Reinstall or replace the sensor. See
pass‑through) removal" on page
Does the problem remain?
"Mailbox left cover
654.
"Sensor (mailbox
693.
Diagnostics and troubleshooting
Yes
Go to step 2.
Go to step 4.
Go to step 4.
Go to step 5.
Go to step 6.
Go to step 7.
Go to step 9.
Go to step 9.
211
4064
No
The problem is
solved.
Go to step 3.
The problem is
solved.
The problem is
solved.
The problem is
solved.
The problem is
solved.
Go to step 8.
The problem is
solved.