Optional Bin Hardware Errors; 306 Errors; 306 Error Messages; Output Expander Transport Drive Failure Service Check - Lexmark M52 Series Service Manual

Action
Step 4
a
Turn off the printer.
b
Replace the controller board. See
on page 424.
c
Wait for 10 seconds, and then turn on the printer.
Does the problem remain?

Optional bin hardware errors

306 errors

306 error messages

Error Description
code
306.50 The bin 1 motor (OE transport) did not turn
on.
306.51 The bin 1 motor (OE transport) did not turn
off.
306.60 The bin 2 motor (OE transport) did not
turn on.
306.61 The bin 2 motor (OE transport) did not
turn off.
306.70 The bin 3 motor (OE transport) did not turn
on.
306.71 The bin 3 motor (OE transport) did not turn
off.

Output expander transport drive failure service check

Action
Step 1
Make sure that all the optional bins are properly installed.
Does the problem remain?
Step 2
Open all optional bin doors, and then check the paper path and
bins for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
"Controller board removal"
Action
See "Output expander transport drive failure service
check" on page
Diagnostics and troubleshooting
359
Yes No
Contact the next The problem is
level of support. solved.
359.
Yes No
Go to step 2. The problem is
solved.
Go to step 4. Go to step 3.
4064