Tray 3 Transport Drive Failure Service Check - Lexmark M52 Series Service Manual

Action
Step 9
Check the interface cable and its connector pins for damage.
Is the interface cable free of damage?
Step 10
Replace the optional tray interface cable. See
sheet tray interface cable removal" on page
Does the problem remain?
Step 11
Make sure that the optional tray controller board is properly
installed. Reseat all the cables on the controller board.
Does the problem remain?
Step 12
Check the opitonal tray controller board and its connector pins for
damage.
Are the tray controller board and its connectors free of damage?
Step 13
Replace the optional tray controller board. See
sheet tray controller board removal" on page
Does the problem remain?

Tray 3 transport drive failure service check

Action
Step 1
Check the paper path and trays for paper fragments and partially
fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 3
Make sure that all the trays and tray inserts are properly installed.
Does the problem remain?
"250‑ and 550-
510.
"250‑ and 550-
506.
Diagnostics and troubleshooting
330
Yes No
Go to step 11. Go to step 10.
Go to step 11. The problem is
solved.
Go to step 12. The problem is
solved.
Contact the next The problem is
level of support. solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
4064