Staple Finisher Paper Stack Flap Removal - Lexmark M52 Series Service Manual

Installation note: Make sure that the stack height actuator is inserted properly.
Staple finisher paper stack flap removal
1
Remove the staple finisher left cover. See
2
Remove the staple finisher right cover. See
3
Remove the staple finisher top cover. See
4
Press the two locks to release the flap hinges.
5
Remove the flap.
"Staple finisher left cover removal" on page
"Staple finisher right cover removal" on page
"Staple finisher top cover removal" on page
Parts removal
631
4064
584.
586.
588.