Sensor (Input) Static Jam Service Check - Lexmark M52 Series Service Manual

Action
Step 25
Perform a print test.
Does the problem remain?

Sensor (input) static jam service check

Action
Step 1
Check the paper path for paper fragments and partially fed paper.
Is the paper path free of paper fragments and partially fed paper?
Step 2
Remove the paper fragments and partially fed paper.
Does the problem remain?
Step 3
a
Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b
Find the sensor (Input).
Does the sensor status change while toggling the sensor?
Step 4
a
Remove the right cover. See
page 420.
b
Check the sensor cable J27 on the controller board for proper
connection.
Is the cable properly connected?
Step 5
Reseat the cable.
Does the problem remain?
Step 6
Replace the sensor. See
Does the problem remain?
Step 7
Perform a print test.
Does the problem remain?
"Right cover removal" on
"Sensor (input) removal" on page
Diagnostics and troubleshooting
Yes
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
Go to step 7.
Go to step 6.
Go to step 6.
Go to step 7.
440.
Contact the next
level of support.
90
4064
No
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
Go to step 5.
The problem is
solved.
The problem is
solved.
The problem is
solved.